|
Forged
Bronze Turnbuckles
TFB series
|
 |
|
Consist of a bronze
body with stainless steel ends. Here is an excellent combination
of stainless and bronze, keeping the qualities of strength
and corrosion resistance and adding a non-galling feature
of excellence. Bodies standard in highly polished chrome or
plain bronze (unchromed) for the traditional look. All end
fittings are 316 grade stainless steel. Bronze bodies are
available on all turnbuckles, simply add B to the end of the
part number.
|
|
Tubular
Turnbuckles
TT series
|
 |
|
Our closed body
turnbuckles feature forged t-bolt toggle jaws and closed body
design with check nut locking. Rigging
swage studs also include wrench flats and reduced shank
ends. All parts shown here are 316 grade stainless steel.
|
|
Rigging
Adjusters
|
 |
|
Our Rigging Adjusters
are used where quick and minimal adjustment is required. All
316 grade stainless steel, these parts make adjustment easy
without the use of tools.
|
|
Eyes
and Forks
|
 |
|
These eyes and forks
are made of the highest quality materials as all of our products
are. MS aircraft eyes and forks are not manufactured by Hayn
but carry our normal discounts and warranty.
|
|
Toggle
Jaws & Toggles
|
 |
|
Below you will find
our rigging toggle jaws as well as rigging pins, and marine
eye toggles, all made from
316 grade stainless steel.
|
|
Hi-MOD
Compression Fittings
|
 |
|
Hayn Marine is proud
to introduce the Hi-mod compression fittings, the latest generation
of mechanical fittings available in the US Market. Engineered
to improve on existing mechanical fittings, the unique design
of the Hi-Mod fitting achieves this goal. The Hi-Mod fittings
are co-manufactured by Hayn Marine and Petersen Stainless
in the UK.
They are unique in a number of ways. The first
is that the cone is longer than comparable fittings currently
available. This spreads the load over a longer portion of
the wire, as well as increases the compressive forces inside
the fitting. The fittings use a crown thrust ring to assure
even spacing of the wire around the cone. With the use of
this crown thrust ring, we do not need to bend the wire around
the top of the cone to achieve the proper seating depth of
the cone in the body. The combination of these features greatly
increases the fitting’s ability to handle fatigue, a
critical component of any rigging part. Without bending the
end of the wire, we are also able to greatly reduce the galling
problem inherent in these fittings. We have increased the
number of slots on the cones to allow for a more even transfer
of the load throughout the wire. The cone is also made from
stainless steel, so it is not required to replace the cone
upon inspection and/or re-use. We do not recommend the use
of sealant in the fitting.
With the Hi-Mod mechanical fittings, ease of assembly, increased fatigue resistance,
and improved design are making these the most talked about mechanical fitting
on the market today
|
|
Other
Rigging Hardware
|
 |
|
Our J Hooks are
used for small boat cable termination at the masthead. This
inexpensive piece of hardware is made of 316 grade stainless
steel and simply hooks into the mast for easy attachment.
|
